Sign up to sell your inventory with NSN Lookup

TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download

Page 70 of 1258

3-5. RIGHT CYLINDER HEAD REPLACEMENT (Cont'd) TM 9-2320-280-34 Change 1 3-12.1 NOTE Use of cylinder head lifting device is optional. 3.1. Install cylinder head lifting device on center of cylinder head (4) with two washers (4.2) and capscrews (4.1). 4. Using hoist or other lifting equipment, remove cylinder head (4). 4.1. Remove and discard gasket (7). 4.2. Remove two capscrews (4.1), washers (4.2), and cylinder head lifting device from cylinder head (4), if installed. 5. For cylinder head (4) and valve repair procedures, refer to TM 9-2815-237-34.