TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 618 of 1258
TM 9-2320-280-34 14-5. WINDSHIELD MAINTENANCE (Cont'd) d. Installation 1. Position windshield (1) on vehicle hood (8). Connect leads 71 (4), 71B (5), and 57F (2) to body harness (6) and install grommet (3) in "A" beam (7). 2. Raise and support front of roof (9) to allow installation of windshield (1). 3. Slide windshield (1) into mounting position between roof (9) and "A" beam (7). 4. Lower front of roof (9) and install two windshield levises (14) on two ring front supports (11) with two washers (12), capscrews (10), washers (12), and locknuts (13). 5. Install three lower hinges (19) to "A" beam (7) with six flat head screws (20), lockwashers (17), and nuts (18). Tighten flat head screws (20) to 8 lb-ft (11 N.m). 6. Install three front hinges (16) to windshield (1) with nine capscrews (15). Tighten capscrews (15) to 15 lb-ft (20 N.m). 14-18