TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 612 of 1258
TM 9-2320-280-34 14-5. WINDSHIELD MAINTENANCE This task covers: a. Removal c. Assembly b. Disassembly d. Installation INITIAL SETUP: Applicable Models Personnel Required All except M996, M996A1, M997, M997A1, One mechanic M997A2, M998, M998A1, M1035, M1035A1, One assistant M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Manual References TM 9-2320-280-20 TM 9-2320-280-24P Tools General mechanic's tool kit: automotive (Appendix G, Item 1) Equipment Condition Wiper arms removed (TM 9-2320-280-20). Left defroster nozzle removed (TM 9-2320-280-20). Materials/Parts Two locknuts (Appendix E, Item 57) Nut and lockwasher assembly Maintenance Level (Appendix E, Item 96) Direct support Six lockwashers (Appendix E, Item 78) Twenty-seven rivets (Appendix E, Item 140) a. Removal 1. Remove six capscrews (13) from two rear windshield mounting brackets (12) and windshield (3). Remove shims (14) from behind mounting brackets (12), if present. 2. Remove two locknuts (7), washers (6), capscrews (4), washers (6), and ring front supports (5) from windshield devises (8). Discard locknuts (7). 3. Remove two locknuts (11), studs (10), washers (9), snubber plates (1), mounts (15), bushings (16), mounts (15), snubber plates (1), and front roof mount plates (2) from windshield support mounts (17). 14-12