TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 602 of 1258
TM 9-2320-280-34 14-3. ROOF REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models All except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix G, Item 1) Materials/Parts Twelve locknuts (Appendix E, Item 57) Nut and lockwasher assembly (Appendix E, Item 96) Sealing compound (Appendix B, Item 49) Manual References TM 9-2320-280-20 TM 9-2320-280-24P Personnel Required One mechanic One assistant Equipment Condition Weapon station tray removed (TM 9-2320-280-20). Maintenance Level Direct support NOTE It may not be necessary to perform the following procedure if damage is isolated to blast shield. Refer to (para. 14-7) for replacement of blast shield. 1. Remove twelve locknuts (5), washers (2), capscrews (1), washers (2), and six roof retainers (3) from bearing (4). Discard locknuts (5). NOTE Perform step 2 for M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, and M1046A1 TOW vehicles only. 2. Remove nut and lockwasher assembly (7) from screw (6) to free TOW wiring harness clamp (8) (at right front “B” pillar cover screw (6) only). Discard nut and lockwasher assembly (7). 14-2