TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 569 of 1258
TM 9-2320-280-34 12-10. RIGHT ENGINE MOUNT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic's tool kit: Engine right mount and insulator removed automotive (Appendix G, Item 1) (para. 3-3). Materials/Parts Maintenance Level Five locknuts (Appendix E, Item 59) Direct support Manual References TM 9-2320-280-24P a. Removal 1. Remove two locknuts (10), washers (1), capscrews (2), and washers (1 ) from support bracket (8) and engine mount bracket (5). Discard locknuts (10). 2. Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5). 3. Remove three locknuts (9), washers (7), capscrews (6), washers (7), support bracket (8), and engine mount bracket (5) from frame rail (11). Discard locknuts (9). b. Installation 1. Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (7), capscrews (6), washers (7), and locknuts (9). 2. Secure support bracket (8) on engine mount bracket (5) with two washers (1), capscrews (2), washers (1), and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-ft (122 N·m). 3. Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3). 12-12