TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 560 of 1258
TM 9-2320-280-34 12-5. SPRING SEAT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic's tool kit: Coil spring removed (TM 9-2320-280-20). automotive (Appendix G, Item 1) Maintenance Level Materials/Parts Direct support Four locknuts (Appendix E, Item 59) Manual References TM 9-2320-280-20 TM 9-2320-280-24P a. Removal NOTE The procedures for removing and installing the four spring seats are basically the same. This procedure covers the right front spring seat. Remove four locknuts (6), washers (4), capscrews (5), washers (4), two spring brackets (3), and spring seat (1) from frame rail (2). Discard locknuts (6). b. Installation Install two spring brackets (3) and spring seat (1) on frame rail (2) with four washers (4), capscrews (5), washers (4), and locknuts (6). Tighten locknuts (6)'to 260 lb-ft (353 N.m). FOLLOW-ON TASK: Install coil spring (TM 9-2320-280-20). 12-3