TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 559 of 1258
TM 9-2320-280-34 12-4. SPLASH SHIELD SUPPORT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic's tool kit: Hood raised and secured (TM 9-2320-280-10). automotive (Appendix G, Item 1) Maintenance Level Materials/Parts Direct support Three locknuts (Appendix E, Item 59) Manual References TM 9-2320-280-10 TM 9-2320-280-24P a. Removal 1. Remove locknut (1), washer (2), capscrew (4), and washer (2) securing splash shield (3) to bracket (7). Discard locknut (1). 2. Remove two locknuts (5), washers (6), capscrews (9), washers (6), and bracket (7) from frame rail (8). Discard locknuts (5). b. Installation 1. Install bracket (7) on frame rail (8) with two washers (6), capscrews (9), washers (6), and lock- nuts (5). Tighten locknuts (5) to 90 lb-ft (122 N.m). 2. Install splash shield (3) on bracket (7) with washer (2), capscrew (4), washer (2), and locknut (1). Tighten capscrew (4) to 15 lb-ft (20 N.m). FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). 12-2