TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 484 of 1258
TM 9-2320-280-34 7-9. TRANSMISSION/TRANSFER CASE INSTALLATION (4L80E) (Cont’d) NOTE Bracket nuts must be loosened prior to installation of crossmember on vehicle for proper alignment. 6. Loosen two nuts (22) on bracket (20) and crossmember (24). 7. Install bracket (20) and crossmember (24) on transmission adapter (15) with two capscrews (23). Tighten capscrews (23) to 65 lb-ft (88 N.m). 8. Install two nuts (12), washers (13), cable (14), washer (26), and locknut (25) on crossmember (24) and support bracket (10). Tighten locknut (25) to 90 lb-ft (122 N.m). 9. Install capscrew (17), two washers (18), bypass valve (16), and nut (21) on crossmember (24) and support bracket (19). Tighten nut (21) to 65 lb-ft (88 N.m). 10. Tighten two nuts (22) to 65 lb-ft (88 N.m). 7-23