TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 481 of 1258
TM 9-2320-280-34 7-8. TRANSMISSION/TRANSFER CASE REMOVAL (4L80E) (Cont’d) WARNING •Torque converter must be removed with the transmission as an assembly. Keep transmission level. The converter may slide off front of transmission and cause injury to personnel or damage to converter. •Do not use hands to free transmission/transfer case assembly of hangups or snags. Use prybar to avoid injury. CAUTION Always remove the transmission/transfer case assembly slowly and watch for the following: binding or hard to move means that something may still be connected that must be removed; ensure that wiring, lines, cables, and rods are not in the path of the removal. 21. Move transmission (2) and transfer case (3) rearward to clear engine (1). 22. Lower transmission (2) and transfer case (3) slowly. 23. Remove transmission (2) and transfer case (3) from under vehicle. NOTE If vehicle is moved because of limited shop space or tactical move- ment, damage to the engine and vehicle may occur. To prevent damage, an engine/transmission support sling can be installed. FOLLOW-ON TASKS: Prepare transmission for disassembly (para. 7-10). 7-20