TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 474 of 1258
TM 9-2320-280-34 7-7. TRANSMISSION/TRANSFER CASE INSTALLATION (3L80) (Cont’d) NOTE Be certain torque converter rotates freely 3. Apply sealing compound to capscrews (5) and studs (2). 4. Move transmission (3) forward onto engine dowels (6). Install four capscrews (5) and two studs (2) on transmission (3) and engine (1). Tighten capscrews (5) and studs (2) to 35 lb-ft (48 N.m). 5. Install speedometer cable (12) in bracket (13) and install 90°adapter (11) to transfer case (4). 6. Raise transmission (3) and transfer case (4) and remove stand supporting engine (1). Install transmission mount crossmember (TM 9-2320-280-20). 7. Remove safety chain and lower transmission jack. NOTE It will be necessary to rotate flywheel clockwise from capscrew in front of crankshaft to gain access to capscrews securing torque converter. 8. Align torque converter (8) with holes in flywheel (10). Install six capscrews (9) and torque converter (8) on flywheel (10). 9. Tighten capscrews (9) to 32 lb-ft (43 N.m). 7-13