TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 463 of 1258
TM 9-2320-280-34 7-3. GOVERNOR MAINTENANCE (3L80) This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: Applicable Models Materials/Parts All vehicles except: M997A2, M1025A2, Cover gasket (Appendix E, Item 32) M1035A2, M1043A2, M1045A2, M1097A2 Manual References Tools TM 9-2320-280-24P General mechanic's tool kit: automotive (Appendix G, Item 1) Maintenance Level Direct support CAUTION Area around governor must be thoroughly cleaned prior to removal to prevent contamination. a. Removal 1. Remove four capscrews (5), vent line clamp (4), governor cover (3), and cover gasket (2) from transmission (1). Discard gasket (2). 2. Remove governor (6) from transmission (1). b. Inspection Inspect governor (para. 17-12). c. Installation 1. Install governor (6) into transmission(1). 2. Install cover gasket (2), governor cover (3), and vent line clamp (4) on transmission (1) with four capscrews (5). Tighten capscrews (5) to 17 lb-ft (23 N.m). 7-2