TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 446 of 1258
TM 9-2320-280-34 6-9. BODY WIRING HARNESS REPLACEMENT (Cont’d) 74. Disconnect harness connector (12) from turn signal control (11). 75. Disconnect harness connector (7) from turn signal flasher module (6). 76. Disconnect harness leads 75A (14) and 75B (13) from stoplight switch (15). 77. Disconnect harness leads 57D (17) and 71C (16) from windshield washer motor leads 57 (1) and 71 (2). 78. Disconnect harness connector (5) from protective control box (3). 79. Remove screw (8), clamp (9), and harness (4) from steering column support (10). 80. Remove three screw assembled washers (18) and shield (19) from dimmer switch (20). 81. Disconnect harness leads 16A (23), 17A (21), and 18A (22) from dimmer switch (20). 82. Remove three capscrews (24), locknuts (27), washers (26), clamps (25), and harness (4) from body (28) Discard locknuts (27). 6-98