Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download

Page 344 of 1258

6-3.3. 100 AMPERE DUAL VOLTAGE ALTERNATOR (12447110) TESTING AND REPAIR (Cont’d) 18. Install core and shaft assembly (5) on rear rotor (24) with six locknuts (25). Tighten locknuts (25) to 45 lb-in. (5 N•m). NOTE Align scribe marks on end housing and stator shell. 19. Install end housing (9) on core and shaft assembly (5) and rear bearing (6). Tap lightly with a soft- faced mallet. 20. Apply silicone compound to studs (16) on stator (15). 21. Install end housing (9) on stator (15) with nine locknuts (14). Tighten locknuts (14) to 18 lb-in. (2 N•m). 22. Install cover plate (20) on front housing (1) with three lockwashers (22) and screws (21). 23. Install bearing bushing (10) on core and shaft assembly (5). 24. Install fan (11) on core and shaft assembly (5) with washer (12) and locknut (13). Tighten locknut (13) to 50 lb-ft (68 N•m). FOLLOW-ON TASKS: • Install voltage regulator (TM 9-2320-280-20). • Install alternator (TM 9-2320-280-20). TM 9-2320-280-34 Change 1 6-19