TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 316 of 1258
1. Install O-ring (14) in end housing (15). 2. Install seal (16) flush in end housing (15) with lip facing away from end housing (15). 3. Install end housing (15) on rotor shaft (17). 4. Slide spacer (19) on rotor shaft (17) and into seal (16) with tapered end of spacer (19) facing away from rotor (18). 5. Apply a small amount of grease around spacer (19) and seal (16). 6. Install O-ring (20) on rotor shaft (17) and into taper of spacer (19). 7. Press bearing (21) onto shaft (17) and into end housing (15). 8. Place a small amount of grease in end housing (15) and on rotor shaft (17). 9. Slide O-ring (13) on rotor shaft (17). 10. Slide spacer (22) on rotor shaft (17) with tapered end of spacer (22) toward O-ring (13). 11. Install seal (23) flush in end housing (15) with lip facing away from end housing (15). 6-3.1. 100 AMPERE ALTERNATOR (12340912) REPAIR (Cont’d) d. Assembly TM 9-2320-280-34 Change 1 6-18.11