TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 311 of 1258
6-3.1. 100 AMPERE ALTERNATOR (12340912) REPAIR (Cont’d) 19. Remove seal (3) and bearing (4) from drive end housing (2). Discard seal (3). 20. Remove seal (6) from drive end housing (2). Discard seal (6). 21. Remove all cords (5) from rectifier leads (8). Discard cords (5). NOTE Prior to removal, tag rectifier mounts and note position of rectifiers for installation. 22. Remove six screws (7), guard washers (12), tension washers (11), insulation washers (10), three rectifier mounts (9), and electrical mount (1) from drive end housing (2). 23. Remove six insulation washers (10) from drive end housing (2) and retain for installation. 24. Use a press or bearing puller to remove bearing (13) from rotor shaft (15). 25. Remove O-ring (17), seal (16), and end housing spacer (14) from rotor shaft (15). Discard O-ring (17) and seal (16). TM 9-2320-280-34 6-18.6 Change 1