TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 303 of 1258
TM 9-2320-280-34 6-3. 60 AMPERE ALTERNATOR REPAIR (Cont’d) 27. Install shim (2), insulator (3), and brush holder (7) on end housing (1) with three screws (6). 28. Install positive output strap (9) on output plate stud (13) and positive rectifier plate (12) with lockwasher (11) and screw (10). 29. Install two springs (4) into brush holder (7). 30. Install two brush leads (15) and lead (16) on insulator (3) and output strap (9) with lockwasher (18) and two screws (14). 31. Install capacitor (8) on output plate stud (13) and negative rectifier plate (17) with washer (22), lockwasher (21), nut (19), and screw (20). 32. Position capacitor (8) on end housing (1) with insulating compound. 33. Install brushes (5) in brush holder (7) against springs (4), and hold in position. 34. Align locating scribe marks (26) on intermediate housing (23) and end housing (1) and install end housing (1) on intermediate housing (23). Using torx socket, install end housing (1) with six lock- washers (24) and torx head screws (25). 6-16