TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 293 of 1258
TM 9-2320-280-34 6-3. 60 AMPERE ALTERNATOR REPAIR (Cont’d) 14. Remove strap (1) from four leads (2) and disconnect lead (20) from output plate stud (5). Discard strap (1). 15. Remove insulating compound from seven rectifier terminals (10) and (16). 16. Unsolder and disconnect six positive rectifier leads (11) from four positive rectifier terminals (10). 17. Remove three screws (12), washers (13), nylon washers (14), positive rectifier plate (9), and insulator (8) from end housing (7). 18. Unsolder and disconnect three negative rectifier leads (15) from negative rectifier terminals (16). 19. Remove three screws (17), washers (18), and negative rectifier plate (19) from end housing (7). 20. Remove four screws (3), output plate (4), O-ring (6), positive rectifier leads (11), negative rectifier leads (15), and leads (2) from end housing (7). Discard O-ring (6). 21. Scribe a locating mark (24) on intermediate housing (23), stator (22), and drive end housing (21). 6-6