TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 246 of 1258
3-26. ENGINE PREPARATION (6.2 L AND 6.5 L) (Cont’d) Change 1 3-183 TM 9-2320-280-34 WARNING Power steering pump must be supported during removal and installation. Failure to do this may cause injury to personnel. NOTE • Perform steps 43 through 46 for all vehicles except M997A2, M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, and M1123 vehicles. • Perform steps 46.1 and 46.2 for 6.5 L configuration. 43. Remove capscrew (9) and lockwasher (10) from power steering bracket (11) and alternator bracket (13). Discard lockwasher (10). 44. Remove adjusting capscrew (19), lockwasher (18), and washer (17) from power steering bracket (11). Discard lockwasher (18). 45. Remove power steering pump assembly (12). 46. Remove two locknuts (16) and front support bracket (15) from water pump housing (14). Discard locknuts (16). 46.1. Remove capscrew (20) and two capscrews (21) from power steering pump (12) and alternator bracket (13). 46.2. Remove power steering pump (12) from alternator bracket (13). 6.5L CONFIGURATION