TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 243 of 1258
TM 9-2320-280-34 3-26. ENGINE PREPARATION (6.2 L AND 6.5 L) WARNING Alternator must be supported during removal. Failure to support alternator may cause injury to personnel or damage to equipment. NOTE Perform steps 37 through 40 for vehicles equipped with 60 and 100 amp Prestolite alternators only. 37. Remove capscrew (15), lockwasher (14), and washer (13), from alternator (20) and adjusting bracket (12). Discard lockwasher (14). 38. Remove two capscrews (16), lockwashers (17), and washers (18) from alternator (20), support bracket (19) and mounting bracket (10). Discard lockwashers (17). NOTE • Perform step 39 for vehicles with new alternator support bracket configuration. • In some cases, a thru-bolt and nut may be present on mounting bracket instead of standard capscrews and washers. 39. Remove two capscrews (16), lockwashers (17), washers (18), spacer (22), and power steering lines bracket (21) from support bracket (19) and mounting bracket (10). Discard lockwashers (17). 40. Remove alternator (20). 3-181