TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 212 of 1258
TM 9-2320-280-34 3-25. ENGINE INSTALLATION (6.5 L) (Cont’d) 18. Install leads 74A (3) and 74B (5) on solenoid (2) with clip (6) and screw (7). 19. Install lead 81B (8) and lead 6 (22) on starter terminal (23) with lockwasher (10) and nut (9). Using torque adapter, tighten nut (9) to 25 lb-ft (34 N m). 20. Install negative cable 7A (16), lead 3D (13), and lead 7 (25) on starter terminal (24) with lock- washer (12) and nut (11). Using torque adapter, tighten nut (11) to 15 lb-ft (20 N m). 21. Install clamp (14) and negative cable 7A (16) on starter (1) with screw (15). NOTE Steps 22 through 25 apply to vehicles equipped with a winch. 22. Install clamp (21) and leads 6 (22) and 7 (25) on oil pan bracket (19) with capscrew (20) and nut and lockwasher assembly (18). 23. Install lead 6 (22) on starter terminal (23) with lockwasher (10) and nut (9). 24. Install lead 7 (25) on starter terminal (24) with lockwasher (12) and nut (11). 25. Using torque adapter, tighten nut (11) to 15-lb-ft (20 N m) and nut (9) to 25 lb-ft (34 N m). 26. Deleted 3-150