TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 211 of 1258
TM 9-2320-280-34 3-25. ENGINE INSTALLATION (6.5 L) (Cont’d) NOTE • It will be necessary to rotate flywheel clockwise from capscrew in front of crankshaft to gain access to install capscrews to torque converter. • Have assistant hold crankshaft pulley in place when installing flywheel to torque converter. 14. Align torque converter (17) to flywheel (15) with six capscrews (16). 15. Tighten capscrews (16) to 32 lb-ft (43 N m). NOTE Gaskets may require bending over edge of converter housings cover to make gaskets seal properly. 16. Apply adhesive to upper converter housing cover gasket (21). Install gasket (21) and upper converter housing (20) on transmission (18) with four capscrews (19). 17. Apply adhesive to lower converter housing cover gasket (24). Install gasket (24) and lower converter housing (23) on transmission (18) with two capscrews (22). 3-149