TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 210 of 1258
TM 9-2320-280-34 3 25. ENGINE REMOVAL (6.5 L) (Cont’d) 5. Remove lifting device from engine lifting sling (1) and lower transmission. 6. Remove two capscrews (4) and sling bracket (6) from left cylinder head (5). 7. Remove pin (2) and sling bracket (6) from engine lifting sling. 8. Remove two capscrews (8) and engine lifting sling from right cylinder head (7) and engine (3). 9. Slide rod (9) forward and connect to fuel injection pump (14). 10. Install rod (9) on switch (11). 11. Install bracket (13) on engine (3) with two capscrews (12). 12. Position rod (9) at wide open throttle and adjust switch (11) to close (TM 9-2320-280-20). Connect harness leads (10) to switch (11) leads. 3-148