Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download

Page 209 of 1258

TM 9-2320-280-34 3 25. ENGINE REMOVAL (6.5 L) (Cont’d) WARNING Transmission must be supported during engine installation. Failure to do this may cause injury to personnel or damage to equipment. 2. Raise and support transmission (3). 3. Install transmission (3) on engine (1) with four capscrews (4) and two studs (2). Using torque sequence tighten capscrews (4) and studs (2) to 35 lb-ft (48 N.m) 4. Align right engine mount insulator (5) on engine mount bracket (6) and install two washers (8) and locknuts (7). Repeat for left engine mount. Using torque adapter, tighten locknuts (7) to 90 lb-ft (122 N.m). 3-147