TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 166 of 1258
TM 9-2320-280-34 3 - 23. ENGINE INSTALLATION (6.2L) (Cont’d) 119. Position CDR valve (12) and bracket (10) over two intake manifold studs (3) and valve cover studs (6). 120. Secure bracket (10) on intake manifold (2) with two nuts (14). Tighten nuts (14) to 15 lb-ft (20 N m). 121. Secure bracket (10) on valve cover (13) with two nuts (11). Tighten nuts (11) to 10 lb-ft (14 N m). 122. Install heater control cable clamp (1) to CPR valve (12) and bracket (10) with washer (16) and screw (15). Tighten screw (15) to 15 lb-ft (20 N m). 123. Connect CDR valve oil fill tube hose (9) to oil fill tube (8) with clamp (7). 124. Connect CDR valve intake manifold hose (5) to intake manifold (2) with clamp (4). 3-104