TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 155 of 1258
TM 9-2320-280-34 3 - 23. ENGINE INSTALLATION (6.2L) (Cont’d) 47. Connect fuel inlet (28) and fuel outlet (29) lines to fuel filter (25) and tighten clamps (26) and (27). 48. Connect engine harness connector (17) to time delay module (23). 49. Connect harness connector plug (19) to protective control box (20). 50. Apply antiseize compound to engine harness ground 3C (31) and install on body (11) with nut and lockwasher assembly (30). 51. Install engine harness (13) on body (11) with clamp (12) and two screws (24). 52. Install engine harness (13) on "A" beam (14) with clamp (16), capscrew (15), and nut (22). 53. Install two rubber insulation pads (18) and (21) to "A" beam (14) and protective control box (20). 3-93