TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 153 of 1258
TM 9-2320-280-34 3 - 23. ENGINE INSTALLATION (6.2L) (Cont’d) 38. Position modulator cable (41) through cable bracket (34) and install washer (35) and start fron t mounting nut (36). CAUTION Ensure cable is clear of exhaust system or other sources of extreme heat to prevent damage to equipment. NOTE Do not tighten mounting nuts. 39. Pull modulator control rod (37) to the rear until stop is engaged and hold in position. 40. With modulator cable (41) in idle position (cable core is extended), adjust modulator mounting nuts (36) and (40) until modulator control rod head (38) and spring clip (39) align. 41. Tighten mounting nuts (36) and (40) and recheck alignment. Readjust if alignment has changed. 42. Pull modulator cable core (33) outward and connect spring clip (39) to modulator control rod head (38). 43. Check modulator cable (41) for ease and smoothness of operation and ensure cable returns to the idle position. 3-91