TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 138 of 1258
TM 9-2320-280-34 3-22. ENGINE REMOVAL (6.2 L) (Cont'd) NOTE • Perform steps 130 through 132 for M1026, M1026A1, M1036, M1038, M1038A1, M1042, M1044, M1044A1, M1046, and M1046A1 vehicles only. • Prior to removal, tag leads for installation. 130. Remove nut (9), lockwasher (10) and lead 7 (11) from starter terminal (8). Discard lockwasher (10). 131. Remove nut (7), lockwasher (6) and lead 6 (4) from starter terminal (5). Discard lockwasher (6). 132. Remove nut and lockwasher assembly (1) and clamp (3) from oil pan bracket screw (2). Discard nut and lockwasher assembly (1). NOTE • Steps 133 through 135 apply to M996, M996A1, M997, and M997A1 vehicles only. • Prior to removal, tag leads for installation. 133. Remove tiedown strap (19), nut (20), lockwasher (21) and 200 ampere cable (22) from starter (23). Discard tiedown (19) and lockwasher (21). NOTE Step 134 applies to M997 and M997A1 vehicles only. Step 135 applies to M996 and M996A1 vehicles only. 134. Remove two nuts (13), lockwashers (12), bolt (18), cable (22), clamp (17), and clamps (14) and (16) from oil pan bracket (15). Discard lockwashers (12). 135. Remove nut (13), lockwasher (12), bolt (18), cable (22), and clamp (17) from oil pan bracket (15). Discard lockwasher (12). 3-76