TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 127 of 1258
TM 9-2320-280-34 3-22. ENGINE REMOVAL (6.2 L) (Cont’d) NOTE • CDR valves on vehicles equipped with deep water fording kit contain two additional vent lines. • Leave hoses connected to CDR valve. 80. Loosen clamp (16) and disconnect CDR valve oil fill tube hose (18) from oil fill tube (17). 81. Loosen clamp (14) and disconnect CDR intake manifold hose (19) from intake manifold (13). 82. Remove screw (8), washer (9) and controls cable clamp (10) from CDR valve (20) and bracket (22). 83. Remove two nuts (11) from two intake manifold studs (12). 84. Remove two nuts (21), CDR valve (20), and bracket (22) from two valve cover studs (15) and studs (12). 3-65