TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1213 of 1258
Change 1 C-33 TM 9-2320-280-34 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont‘d) Figure C-46. Drill Fixture. MATERIAL BLOCK STOCK SIZE DESCRIPTION SPECIFICATION 0.50-IN. THICK PLATE, METAL, STEEL ASTM A36 DRILL FIXTURE PART NUMBER CUT TO SIZE MANUFACTURED FROM (INCHES) NSN N/A AS SHOWN 9515-00-969-5124 INSTRUCTIONS: 1. Cut piece from steel plate 0.50-in. thick to fabricate fixture as shown. 2. Locate, mark, and drill three 0.438-in. diameter holes in metal plate. 3. Remove all burrs and sharp edges.