TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1184 of 1258
TM 9-2320-280-34 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) MATERIAL BLOCK STOCK SIZE SPECIFICATION DESCRIPTION 2" X 4" (Nom) and WOOD MMM-L-751 2" X 12" (Nom) LUMBER, SOFTWOOD NAILS (FF-N-105) PIECE CUT LENGTH (INCHES) MANUFACTURED FROM SIZE QTY A (2 ea) 15-3/4 2" X 4" (Nom) 12D 12 ea B 8-1/4 2" X 4" (Nom) C 8-1/4 2" X 4" (Nom) D 8-3/4 2" X 12" (Nom) Figure C-4. Transfer Case Support Stand, 5992393 INSTRUCTIONS: 1. Cut four pieces of wood, "A" (2 ea), "B", and "C" to length shown, using NSN 5510-00-220-6146. 2. Cut one piece of wood, "D”, to length shown, using NSN 5510-00-220-6250. 3. Cut a “VEE" notch in pieces “B", “C", and “D" in locations shown. 4. Cut a rectangular notch in piece “D" in location shown. 5. Using two nails at each joint, NSN 5310-00-753-3884 (5 pound box), assemble pieces "A", "B", "C", and "D”as shown. C-4