TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1183 of 1258
TM 9-2320-280-34 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) MATERIAL BLOCK STOCK SIZE DESCRIPTION SPECIFICATION 3/8" X 3/8" ALUMINUM Figure C-3. Core Shaft Nut Tool, 5992392 INSTRUCTIONS: 1. Cut to length from 3/8" square aluminum stock, NSN 9530-00-236-7723 or NSN 9530-00-061-0463. 2. Drill 3/16" hole through middle of stock. 3. Remove all burrs. C-3