TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1138 of 1258
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 Change 1 22-16.85 1. Position metal strip D (6), with arrow facing up and right, onto insert panel (2). Align reference lines (4) and insert panel edges (7). 2. Using metal strip D (6) as a template, locate, mark, and drill nine 0.187-in. diameter holes through insert panel (2). Remove metal strip D (6). 3. Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2) and metal strip D (6). 4. Position metal strip D (6) on insert panel (2) and install with nine rivets (8). 5. Remove any adhesive residue and clean edges of metal strip D (6) and insert panel (2). i. Metal Strip D and Insert Panel Assembly