TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1130 of 1258
22-9.5. RIGHT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 Change 1 22-16.77 7. Cut metal strip (5) from sheet metal, and mark center line (6) and directional arrow (10). Identify metal strip (5) as E. 8. Place metal strip E (5) on a suitable work surface, with arrow facing up and left. 9. Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip E (5). 10. Cut two metal strips (7) from sheet metal, and mark center line (8), and directional arrow (9). Identify metal strips (7) as F and G. 11. Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip F (7). 12. Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip G (7).