TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1115 of 1258
22-9.4. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 22-16.62 Change 1 1. Position metal strip C (2), with arrow facing up and toward metal strip A (5), on insert panel (1). Align reference lines (4) of metal strip A (5) and C (2) and line (3) with edge of metal strip C (2). 2. Using metal strip C (2) as a template, locate, mark, and drill eight 0.187-in. diameter holes through insert panel (1). 3. Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (1) and metal strip C (2). 4. Position metal strip C (2) on insert panel (1) and install with eight rivets (6). 5. Remove any adhesive residue and clean edges of metal strip C (2) and insert panel (1). f. Metal Strip C and Insert Panel Assembly