TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1107 of 1258
22-9.4. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 22-16.54 Change 1 1. Cut metal strip (1) from sheet metal, and mark two reference lines (2), centerline (3), and directional arrow (4). Identify metal strip (1) as A. 2. Locate, mark, and drill twenty-four 0.187-in. diameter holes through metal strip A (1). 3. Cut metal strip (5) from sheet metal, and mark two centerlines (6), and directional arrow (7). Identify metal strip (5) as B. 4. Locate, mark, and drill twenty 0.187-in. diameter holes in metal strip B (5). 5. Cut metal strip (8) from sheet metal, and mark two centerlines (9), and directional arrow (10). Identify metal strip (8) as C. 6. Locate, mark, and drill eighteen 0.187-in. diameter holes through metal strip C (8). b. Metal Strips Fabrication