TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1087 of 1258
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 22-16.34 Change 1 1. Position reinforcement strip A (2) on insert panel (1). Align reference lines (3) with edges of rein- forcement strip A (2). 2. Using reinforcement strip A (2) as a template, locate, mark, and drill fourteen 0.187-in. diameter holes through insert panel (1). Remove reinforcement strip A (2). 3. Apply approximately 0.125-in. thickness of adhesive sealant to shaded surfaces of insert panel (1) and reinforcement strip A (2). 4. Position reinforcement strip A (2) on insert panel (1) and install with fourteen rivets (4). 5. Remove any adhesive residue and clean edges on reinforcement strip A (2) and insert panel (1). e. Reinforcement Strip Aand Insert Panel Assembly