TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1081 of 1258
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 22-16.28 Change 1 1. Cut two metal strips (2) from sheet metal, and mark two reference lines (1), centerline (3), and directional arrow (4). Identify two metal strips (2) as C and D. 2. Place metal strips C and D (2) on a suitable work surface with arrow (4) facing up and left. 3. Locate, mark, and drill twenty-four 0.187-in. diameter holes through metal strips C and D (2). 4. Bend metal strips C and D (2) 1.50 in. c. Metal Strips Fabrication