TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1080 of 1258
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 Change 1 22-16.27 4. Cut reinforcement strip (4) from sheet metal, and mark four reference lines (5), centerline (6), and letter B on reinforcement strip (4). 5. Locate, mark, and drill eighteen 0.187-in. diameter holes and one 0.500-in. diameter hole through reinforcement strip B (4). 6. Remove all burrs and round all sharp edges of reinforcement strip B (4).