TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1079 of 1258
22-9.3. LEFT REAR FLOOR PANEL REPAIR (Cont’d) TM 9-2320-280-34 22-16.26 Change 1 1. Cut reinforcement strip (1) from sheet metal, and mark four reference lines (2), centerline (3), and letter A on reinforcement strip (1). 2. Locate, mark, and drill fourteen 0.187-in. diameter holes and one 0.750-in. diameter hole through reinforcement strip A (1). 3. Remove all burrs and round all sharp edges on reinforcement strip A (1). b. Reinforcement Strips Fabrication