TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 107 of 1258
3-21.1. ENGINE REPLACEMENT IN SHIPPING/STORAGE CONTAINER (Cont’d) TM 9-2320-280-34 Change 1 3-45 6. Remove two capscrews (24) and engine lifting sling from right cylinder head (23). 7. Remove two capscrews (22) and sling bracket from left cylinder head (20). 8. Visually check humidity indicator (17) for discolorization. If indicator (17) is dark purple, replace desiccant (3). NOTE Ensure gasket is seated properly. 9. Position upper container (4) using alignment pins (15) on gasket (10) and lower container (13). 10. Install upper container (4) on lower container (13) with twenty-six capscrews (16), washers (18), and nuts (19). FRONT RIGHT