TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1067 of 1258
TM 9-2320-280-34 22-16.14 Change 1 22-9.2. LEFT FRONT FLOOR PANEL REPAIR (Cont’d) 3. Apply approximately 0.125-in. thickness of adhesive sealant to shaded mating surface of insert panel (1) and metal strip D (2). 4. Position metal strip D (2) on insert panel (1) and install with seven rivets (3). 5. Remove any adhesive residue and clean edges of metal strip D (2) and insert panel (1). 1. Position metal strip B (6), with arrow facing up and toward metal strip C (5), on insert panel (1). Align reference line (4) with edge of metal strip B (6). 2. Using metal strip B (6) as a template, locate, mark, and drill twelve 0.187-in. diameter holes through insert panel (1). 3. Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (1) and metal strip B (6). g. Metal Strip B and Insert Panel Assembly