TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1063 of 1258
TM 9-2320-280-34 22-16.10 Change 1 22-9.2. LEFT FRONT FLOOR PANEL REPAIR (Cont’d) 7. Position insert panel (2), with arrow facing down and toward front of vehicle, to underside of left front floor panel (1). 8. Obtain a minimum clearance of 0.10 in. between edges of insert panel (2) and left front floor panel (1). 9. Remove insert panel (2). 1. Position metal strip A (3), with arrow facing up and left, on insert panel (2). Align reference lines (5) and (4) with edges of metal strip A (3). 2. Using metal strip A (3) as a template, locate, mark, and drill thirteen 0.187-in. diameter holes through insert panel (2). 3. Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2) and metal strip A (3). 4. Install metal strip A (3) on insert panel (2) with thirteen rivets (6). 5. Remove adhesive residue and clean edges of metal strip A (3) and insert panel (2). d. Metal Strip A and Insert Panel Assembly