TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 1056 of 1258
TM 9-2320-280-34 Change 1 22-16.3 22-9.2. LEFT FRONT FLOOR PANEL REPAIR This task covers: a. Left Front Insert Panel Fabrication f. Metal Strip D and Insert Panel Assembly b. Metal Strips Fabrication g. Metal Strip B and Insert Panel Assembly c. Left Front Floor Panel Removal h. Left Front Floor Panel and Insert Panel Drilling d. Metal Strip Aand Insert Panel Assembly i. Insert Panel and Left Front Floor Panel Installation e. Metal Strip C and Insert Panel Assembly INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix G, Item 1) Manual References TM 9-2320-280-20 TM 9-2320-280-24P TM 43-0139 Materials/Parts One hundred five rivets (Appendix E, Item 143) Twenty-five rivets (Appendix E, Item 145.1) Sheet metal (Appendix E, Item 200.1) Adhesive (Appendix B, Item 1.1) Adhesive sealant (Appendix B, Item 4.1) Equipment Condition • Fire extinguisher mount bracket removed (TM 9-2320-280-20). • Driver’s seat assembly removed (TM 9-2320-280-20). • Front and rear seat support panels removed (TM 9-2320-280-20). • Left floor insulation removed (TM 9-2320-280-20). Maintenance Level General Support NOTE All dimensions are in inches. 1. Cut insert panel (1) from sheet metal as shown and mark four reference lines (2) and directional arrow (3) on insert panel (1). a. Left Front Insert Panel Fabrication