TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 18 of 1170
TM 9-2320-280-20-3 10-2. FUEL FILLER HOUSING REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Manual Reference General mechanic’s tool kit TM 9-2320-280-24P automotive (Appendix B, Item 1) 1. Remove filler cap “T” handle (1) and filler cap (2) from filler spout (6). 2. Remove three nuts (7), washers (4), capscrews (3), and washers (4) from filler housing (5) and filler spout (6). 3. Remove six screws (11) and washers (10) from fuel filler housing (5) and right outer wheelhouse panel (8). 4. Push filler cap (2) through filler housing (5) and remove filler housing (5). 5. Inspect speed nuts (9) for presence or damage. Replace if defective or missing. 1. Pull filler cap (2) through filler housing (5) and install housing (5) on right outer wheelhouse panel (8). 2. Secure filler housing (5) to right outer wheelhouse panel (8) with six washers (10) and screw (11). Tighten screws (11) to 20 lb-in. (2 N.m). 3. Secure filler housing (5) to filler spout (6) with three washers (4), capscrews (3), washers (4), and nuts (7). 4. Install filler cap (2) on filler spout (6) with “T” bade (1). 10-3