TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 947 of 1170
(1) Group Number (2) Component/Assembly (3) Maintenance Function (6) Remarks Code (5) Tools and Equipment Ref Code (4) Maintenance Level C O Depot D Unit TM 9-2320-280-20-3 Section II. MAINTENANCE ALLOCATION CHART (Cont'd) B-12 Change 2 General Support H Direct Support F 1002 Differential Assembly Inspect 0.1 Service 0.5 1,2 Replace 5.0 1,2 Repair 10.2 1,7,75,94, 117-124 Seal, Output Shaft, Differential Replace 1.0 1,6,117 Seal, Pinion, Differential Replace 0.3 1,6,94 Differential Cover Replace 0.5 1,2 H 1004 Knuckle and Geared Hub Inspect 0.1 Service 0.5 1,2 Replace 2.0 1,2,167 Repair 1.2 1,2,6,75, K 126-128,129 Bearing, Spindle, Geared Hub Adjust 0.9 1,2,127 Seal, Input, Geared Hub Replace 2.0 1,2,75,126 Seal, Spindle, Geared Hub Replace 1.0 1,2,75,127,128 I Steering Stop Adjust 0.5 2 Replace 0.3 2 Upper Control Arm Inspect 0.1 Replace 1.0 1,2 Repair 1.0 1,2 Lower Control Arm Inspect 0.1 Replace 2.6 1,2 Repair 1.0 1,2 Ball Joint, Upper and Lower Replace 0.6 1,2,129,146, 151 11 REAR AXLE 1100 Halfshaft Inspect 0.2 Replace 1.8 1,2 Repair 1.0 1,2 1102 Differential Assembly Inspect 0.1 Service 0.5 1,2 Replace 5.0 1,2 Repair 10.0 1,7,75,94, 117-124 Seal, Output Shaft, Differential Replace 1.0 1,6,117 Seal, Pinion, Differential Replace 0.3 1,6,94