TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 917 of 1170
TM 9-2320-280-20-3 12-186. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d) 12-304 Change 1 1. Install rear shield (14) to rear-front crossmember (9) with three spacers (12), capscrews (10), six washers (11), and three locknuts (13). Tighten locknuts (13) to 44 lb-ft (60 N•m). 2. Install rear shield (14) on three mounting brackets (7) with three capscrews (8), six washers (6), and three locknuts (5). Do not tighten locknuts (5). 3. Install three mounting brackets (7) on rear-rear crossmember (3) with six spacers (15), capscrews (1), twelve washers (2), and six locknuts (4). Tighten locknuts (4) to 24 lb-ft (33 N•m). 4. Tighten three locknuts (5) to 24 lb-ft (33 N•m). h. Rear Shield Installation