TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 907 of 1170
TM 9-2320-280-20-3 12-185. SIREN AND WARNING LIGHT INSTALLATION (Cont’d) 10. Locate, mark, and drill two 0.146-in. (3.7-mm) diameter holes (6), equally spaced, in left side windshield frame (8) and four 0.146-in. (3.7-mm) diameter holes (5), equally spaced, along top of windshield frame (3). 11. Install wires (4) and warning light wires (9) on left side windshield frame (8) and along top of windshield frame (3) with six clamps (2) and screws (1). 12. Install warning light wires (9) on wiring harness under dash (7) and engine compartment (10) with ten tiedown straps (11). 13. Apply adhesive to right and left side roof panel insulation (12), and install on roof (13). 12-294