TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 860 of 1170
12-156. EQUIPMENT RACK REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M998, M998A1, M1038, M1038A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Tape (Appendix C, Item 50) Six lockwashers (Appendix G, Item 134) Two locknuts (Appendix G, Item 88) Manual References TM 9-2320-280-24P Equipment Condition • Tool chest straps removed (para. 12-157). • Troop seat support pad removed (para. 12-158). 1. Remove six capscrews (3), lockwashers (4), and equipment rack (5) from cargo floor (6). Discard lockwashers (4). 2. Remove two locknuts (1), washers (8), screws (7), and retainer bracket (2) from equipment rack (5). Discard locknuts (1). 3. Remove tape from equipment rack (5). 1. Apply tape to equipment rack (5). 2. Install retainer bracket (2) on equipment rack (5) with two washers (8), screws (7), and locknuts (1). 3. Install equipment rack (5) on cargo floor (6) with six lockwashers (4) and capscrews (3). Tighten capscrew (3) to 15 lb-ft (20 N•m). b. Installation a. Removal FOLLOW-ON TASKS: • Install troop seat support pad (para. 12-158). • Install tool chest straps (para. 12-157). TM 9-2320-280-20-3 Change 2 12-247