Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 855 of 1170

12-152. BIPOD STOWAGE TRAY MAINTENANCE This task covers: a. Removal c. Assembly b. Disassembly d. Installation INITIAL SETUP: Applicable Models M998, M998A1, M1038, M1038A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Tape (Appendix C, Item 50) Thirteen locknuts (Appendix G, Item 88) Six locknuts (Appendix G, Item 70) Three lockwashers (Appendix G, Item 135) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-24P 1. Remove five locknuts (7), washers (8), capscrews (1), and washers (8) from bipod stowage tray (2) and wheelhouse (3). Discard locknuts (7). 2. Remove three capscrews (6), lockwashers (5), washers (4), and bipod stowage tray (2) from wheelhouse (3). Discard lockwashers (5). 3. Remove tape from bipod stowage tray (2). 1. Remove six locknuts (15), washers (13), capscrews (12), washers (13), and support bracket (14) from tray (16). Discard locknuts (15). 2. Unlatch straps (9) from footman loops (21). 3. Remove four locknuts (18), washers (17), screws (11), two footman loops (10), and straps (9) from tray (16). Discard locknuts (18). 4. Remove four locknuts (19), washers (20), screws (22), and two footman loops (21) from tray (16). Discard locknuts (19). 1. Install two footman loops (21) on tray (16) with four screws (22), washers (20), and locknuts (19). 2. Install two footman loops (10) on two straps (9) and tray (16) with four screws (11), washers (17), and locknuts (18). 3. Latch straps (9) to footman loops (21). 4. Install support bracket (14) on tray (16) with six washers (13), capscrews (12), washers (13), and locknuts (15). Tighten locknuts (15) to 6 lb-ft (8 N•m). 1. Apply tape to bipod stowage tray (2). 2. Install bipod stowage tray (2) on wheelhouse (3) with three washers (4), lockwashers (5), and capscrews (6). Tighten capscrews (6) to 6 lb-ft (8 N•m). 3. Secure bipod stowage tray (2) to wheelhouse (3) with five washers (8), capscrews (1), washers (8), and locknuts (7). Tighten locknuts (7) to 6 lb-ft (8 N•m). d. Installation c. Assembly b. Disassembly a. Removal TM 9-2320-280-20-3 12-242 Change 2