TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 839 of 1170
b. Disassembly c. Assembly TM 9-2320-280-20-3 12-144. REAR RADIO RACK MAINTENANCE (Cont’d) 4. Remove two capscrews (36), washers (37), antenna cables (14), clamps (38), and radio rack (17) from cargo floor (23). 5. Remove two capscrews (35), washers (34), cargo tiedowns (33), and radio rack braces (29) from cargo floor (23). 6. Remove two capscrews (16), washers (15), and radio rack (17) from cargo floor (23). 1. Remove four locknuts (7), washers (8), capscrews (10), washers (8), and two braces (9) from supports (6). Discard locknuts (7). 2. Remove three locknuts (12), washers (4), capscrews (3), washers (4), and two braces (13) from shelves (5). Discard locknuts (12). 3. Remove seven locknuts (11), washers (1), capscrews (2), washers (1), and two shelves (5) from supports (6). Discard locknuts (11). 1. 2. 3. NOTE Assemble shelves to supports with holes designated “A” facing in the same direction. Install two shelves (5) on supports (6) with seven washers (1), capscrews (2), washers (1), and locknuts (11). Tighten locknuts (11) to 15 lb-ft (20 NŽm). Install two braces (13) on shelves (5) with three washers (4), capscrews (3), washers (4), and locknuts (12). Tighten locknuts (12) to 8 lb-ft (11 NŽm). Install two braces (9) on supports (6) with four washers (8), capscrews (10), washers (8), and locknuts (7). Do not tighten locknuts (7). 12-226